Nickel Alloy Inconel 625 Plate Sheet Suppliers In China

NICKEL ALLOY INCONEL 625 PLATE

Inconel 625 is a widely utilized nickel-chromium alloy renowned for its high strength, excellent fabricability, and exceptional corrosion resistance. Ronsco is proud to exported it to more than 80 countries.

GET A QUOTE or Download Spec Sheet

MORE DETAILS ABOUT NICKEL ALLOY INCONEL 625 PLATE

Product Name	Nickel Alloy Inconel 625 Plate, Nickel Alloy Inconel 625 Sheet
Equivalent Grade	Inconel 625, UNS N06625, Alloy 625, W.Nr. 2.4856
Standard	GB, AISI, ASTM, DIN, EN, JIS
Process	Hot Rolled, Cold Rolled, Forged
Sizes	Thickness:1-100mm, Width:500-2400mm, Length: Up to 9000mm
Surface Treatment	NO.1, 1D, 2D, 2B, NO.4, BA, HL, Mirror, Embossim, Sandblasted
Fabricating	Rolling, Bending, Sllitting, Decoiling, Cutting, Drilling, Punching, Beveling, Welding etc.
Application	Oil&Gas, Petroleum, Vessels, Ship Building, Water Treatment And Environmental Protection etc.

GENERAL INFO ABOUT EACH Nickel Alloy Plate GRADE

Strength of Inconel 625 is derived from the stiffening effect of molybdenum and niobium on its nickel-chromium matrix, thus precipitation hardening treatments are not required, this combination of elements also is responsible for superior resistance to a wide range of corrosive environments of unusual severity as well as to high-temperature effects such as oxidation and carburization. Service temperatures range from cryogenic to 1800°F (982°C).

Single Plate Of Rolling Specification
Thickness/Width	1500	1800	2000	2200	2400
4-6mm	√	√	-	-	-
6-10mm	√	√	√	√	√
11-12mm	√	√	√	√	√
13-14mm	√	√	√	√	√
17-25mm	√	√	√	√	√
26-70mm	√	√	√	√	√
71-100mm	special	special	special	special	special

MORE DETAILS ABOUT EACH Nickel Alloy Plate GRADE

Hot Forming
Cold Forming
Welding

Inconel 625:

Inconel 625 was especially developed to retain high strength at elevated temperature, it resists deformation at hot-working temperatures. If hot forming of this alloy is required, powerful equipment is necessary. When Alloy 625 is hot-formed, it should be heated in a furnace whose temperature is held at (but not above) 2150°F. To guard against duplex grain structure, the work should be given uniform reductions. Final minimum reductions of 15 to 20% for open-die work are recommended.

Inconel 625:

Inconel 625 can be cold-formed by standard processes. Increased tensile properties can be achieved by cold work for moderate temperature applications. Tensile strengths of more than 300,000 psi accompanied by good ductility have been developed in 0.010-0.020-in-diameter wire after 75-90% cold reduction.

Inconel 625:

Inconel 625 is best machined in the annealed condition. Low cutting speeds should be used and the cutting tool should be engaged at all times to minimize work-hardening. Adequate cut depth is necessary to assure avoiding contact with the previously formed work-hardened zone.

CHEMICAL PROPERTIES

Material	Ni	Cr	Fe	Mo	Nb	C	Mn	Si
N06625	58.0 min	20.0-23.0	5.0 max	8.0-10.0	3.15-4.15	0.10 max	0.50 max	0.50 max

MECHANICAL PROPERTIES

Material	Tensile strength	Yield strength 0,2	Elongation	Hardness HB30
N06625	760 N/mm²	345 N/mm²	30%	220HB

MORE DETAILS ABOUT EACH Nickel Alloy Plate PROCESS

Steel Making Process
Hot Roll Process
Solid Solutions & Pickling

MORE DETAILS ABOUT EACH Nickel Alloy Plate SURFACE

NO.1
2D
2B
NO.4
BA
HL
Mirror

NO.1 surface treated by heat treatment and pickling after hot rolling. The appearance is silver white, matt and bright. This surface is suitable for industries that require heat resistance and corrosion resistance, and the surface brightness is not important. Common applications include industrial tank and chemical industrial plants etc..

2D surface treated by heat treatment and pickling after cold rolling. The appearance is silver white, smoother but of matt grain. Common applications include petrochemical production equipment, automotive components, building materials and water pipes etc..

After 2D treatment, the final process is lightly cold rolled by a polishing roller to obtain proper gloss. The appearance is smooth and bright, and easy to re-grind to make the surface more brighter. Common applications include building materials, tableware etc..

NO.4 is a product ground with a grinding belt of size 150-180. It has better gloss, discontinuous rough lines and finer stripes than No.3 stainless steel castings commonly used polished and sanded surfaces. Common applications include food processing equipment, home electrical products, medical equipment etc..

BA surface is also produced by cold rolling and de-scaling. It has excellent surface gloss, high reflectivity. In addition, The very smooth surface also makes this surface highly suitable for further finishing processes such as mirror polishing and chrome plating. Common applications include catering equipment etc..

HL use a polishing abrasive belt with an appropriate particle size (150-320 mesh) to grind, with obvious straight stripes. The surface is beautiful, good texture and scratch is not obvious, durable, wear-resistant. Common applications include building decoratio, elevators, vehicle parts, etc..

Mirror is produced by polishing with successively finer abrasives and buffing extensively until all grit lines from preliminary grinding operations are removed. The feature is highest reflectivity. Mainly used for interior and exterior decoration materials of automobiles and buildings.

FREQUENTLY ASKED QUESTIONS

What Industries Benefit Most From Using Inconel 625 Plates?
How Can I Ensure The Quality Of Inconel 625 Plates?
Are There Any Special Maintenance Requirements For Inconel 625 Plates?

What Industries Benefit Most From Using Inconel 625 Plates?

Answer:

Industries that benefit significantly from Inconel 625 plates include: Aerospace, Oil and Gas, Marine Engineering, Chemical Processing, Power Generation.

How Can I Ensure The Quality Of Inconel 625 Plates?

Answer:

Ensuring the quality of Inconel 625 plates involves sourcing from reputable suppliers who adhere to industry standards and quality assurance protocols. Look for certifications such as ASTM, ASME, or ISO standards that verify the material's compliance with required specifications. Conducting material tests, including chemical analysis and mechanical testing, can further ensure the plates meet performance expectations.

Are There Any Special Maintenance Requirements For Inconel 625 Plates?

Answer:

Inconel 625 plates generally require minimal maintenance due to their inherent corrosion resistance and durability. However, regular inspections are recommended to ensure that no external factors, such as accumulated debris or chemical exposure, have compromised their performance. In harsh environments, periodic cleaning with appropriate agents may be necessary to remove contaminants and maintain the alloy's effectiveness.

Related news

Inconel 718

UNS N07718 is a high-strength and corrosion-resistant age-hardenable alloy, the age hardening is achieved by specific additions of niobium, titanium and aluminum. The alloy suitable for temperatures from -423° to 1300°F. Its welding characteristics, especially its resistance to post weld cracking, are outstanding. In addition, Inconel 718 can be fabricated with ease and economy, combined with good tensile, fatigue, creep, and rupture strength, have resulted in its use in a wide range of applications.
More Details
Inconel 625

UNS N06625 is a widely utilized nickel-chromium alloy renowned for its high strength, excellent fabricability, and exceptional corrosion resistance. Strength of Inconel 625 is derived from the stiffening effect of molybdenum and niobium on its nickel-chromium matrix, thus precipitation hardening treatments are not required, this combination of elements also is responsible for superior resistance to a wide range of corrosive environments of unusual severity as well as to high-temperature effects such as oxidation and carburization. Service temperatures range from cryogenic to 1800°F (982°C).
More Details
Inconel 601

Alloy 601 is a general-purpose engineering material for applications that require resistance to heat and corrosion. An outstanding characteristic of Alloy 601 is its resistance to high temperature oxidation. The alloy also has good resistance to aqueous corrosion, has high mechanical strength, and is readily formed, machined and welded. The alloy's nickel base, in conjunction with substantial chromium content, provides resistance to many corrosive media and high- temperature environments. Oxidation resistance is further enhanced by the aluminum content.
More Details