UNS S32760 is a duplex stainless steel especially designed for service in aggressive chloride-containing environments and has additions of W and Cu compared to UNS S32750. It has very good resistance to localized corrosion and stress corrosion cracking in combination with high mechanical strength. The pitting resistance and yield strength of the S32760 material makes its allowing for leaner design in load bearing applications, widely used in various fields.

15-5PH is a martensitic precipitation-hardening stainless steel that provides high strength, good corrosion resistance, good mechanical properties at temperatures up to 600°F (316°C) and good toughness in both the longitudinal and transverse directions in both base metal and welds. 15-5 PH stainless steel is the ferrite-free version of 17-4PH stainless steel. Both materials widely used in the aerospace, chemical, petrochemical, food processing, paper and general metalworking industries

Nitronic 60 is an anti-galling and wear resistant austenitic stainless steel with superio uniform corrosion resistance to 304 in most media, and superior chloride pitting resistance to 316. The room temperature yield strength of Nitronic 60 is also nearly twice that of types 304 and 316. In addition, the material is also possesses excellent high temperature oxidation resistance and low temperature impact resistance.

UNS N06075 is an 80/20 nickel-chromium alloy alloy with controlled additions of titanium and carbon. The alloy known for its high-temperature strength, corrosion resistance, and excellent mechanical properties, widely used in various fields. Today, it is mostly used for sheet applications calling for oxidation and scaling resistance coupled with medium strength at high operating temperatures. Also,Nimonic 75 is readily fabricated and welded.

UNS N07080 is a wrought, age-hardenable nickel-chromium alloy, strengthened by additions of titanium, aluminum and carbon, developed for service at temperatures up to 815°C (1500°F). It is produced by high-frequency melting and casting in air for forms to be extruded.

UNS N05500 is a precipitation hardenable, nickel-copper alloy, it has low magnetic permeability and strong non-magnetic characteristics over a wide range of temperatures, including subzero. The alloy has similar corrosion resistance to that of Monel 400, with the additional advantage of greater strength and hardness. In addition, the increased properties are obtained by adding aluminum and titanium to the nickel-copper base, and by heating under controlled conditions so that submicroscopic particles of Ni3 (Ti, Al) are precipitated throughout the matrix.

UNS N04400 is a single phase, solid-solution alloy that can be hardened only by cold working, rather than heat treatment, it has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments. Monel 400 has excellent mechanical properties at subzero temperatures. Strength and hardness increase with only slight impairment of ductility or impact resistance. The alloy does not undergo a ductile-to-brittle transition even when cooled to the temperature of liquid hydrogen, this is in marked contrast to many ferrous materials.

UNS N07718 is a high-strength and corrosion-resistant age-hardenable alloy, the age hardening is achieved by specific additions of niobium, titanium and aluminum. The alloy suitable for temperatures from -423° to 1300°F. Its welding characteristics, especially its resistance to post weld cracking, are outstanding. In addition, Inconel 718 can be fabricated with ease and economy, combined with good tensile, fatigue, creep, and rupture strength, have resulted in its use in a wide range of applications.

UNS N06625 is a widely utilized nickel-chromium alloy renowned for its high strength, excellent fabricability, and exceptional corrosion resistance. Strength of Inconel 625 is derived from the stiffening effect of molybdenum and niobium on its nickel-chromium matrix, thus precipitation hardening treatments are not required, this combination of elements also is responsible for superior resistance to a wide range of corrosive environments of unusual severity as well as to high-temperature effects such as oxidation and carburization. Service temperatures range from cryogenic to 1800°F (982°C).

UNS N07090 is a wrought nickel-chromium-cobalt base alloy strengthened by additions of titanium and aluminum. It has been developed as an age-hardenable creep- resisting alloy for service at temperatures up to 920°C (1688°F). The alloy has high tensile strength and creep resistance, good oxidation resistance and corrosion resistance in 815~870°C, high fatigue strength and good formability and weldability under the action of repeated cold and heating.

UNS N07263 is a nickel-based superalloy known for its exceptional strength, high-temperature resistance, and excellent corrosion resistance. Developed for applications requiring high strength and oxidation resistance at elevated temperatures, Nimonic 263 offers a combination of mechanical properties and thermal stability. Also, the alloy exhibits good weldability, allowing for the fabrication and joining of components using various welding processes.

Alloy 29-17 is a a vacuum melted nickel-iron-cobalt low expansion alloy containing approximately 29% nickel and 17% cobalt. Its chemical composition is controlled within narrow limits to assure precise uniform thermal expansion properties. Extensive quality controls are employed in the manufacture of this alloy to ensure uniform physical and mechanical properties for ease in deep drawing, coining, stamping and machining.