Our products conform to GB, AISI, ASTM, DIN, EN, JIS standard for stainlesss steel coil, sheet and plate.
|
Product Name |
316/316L Stainless Steel Strip |
|
Equivalent Grade |
316: AISI 316, UNS S31600, SAE 316, DIN 1.4401, SUS 316, X5CrNiMo17-12-2 |
|
316L: AISI 316L, UNS S31603, SAE 316L, DIN 1.4404, SUS 316L, X2CrNiMo17-12-2 |
|
|
Standard |
GB, AISI, ASTM, DIN, EN, JIS |
|
Process |
Hot Rolled, Cold Rolled |
|
Sizes |
Thickness: 0.1-2mm, Width: 10-600mm |
|
Surface Treatment |
NO.1, 2B, NO.4, BA, HL, Mirror |
|
Inspection |
SGS, TUV, BV, ABS, LR etc. |
|
Packing |
Wooden Box, Wooden Pallet, Iron Frame |
|
Application |
Oil&Gas, Petroleum, Vessels, Ship Building, Water Treatment And Environmental Protection etc. |
316/316L stainless steel stripl is a austenitic stainless steel gtades that has molybdenum content. The addition of molybdenum leads to exceptional performance in corrosive environments making it a commonly chosen material for chemical processing equipment and heat exchangers etc..
316/316L Stainless Steel Grade::
For maximum corrosion resistance, the material should be annealed at 1900°F (1038°C) minimum and water quenched or rapidly cooled by other means after hot working.
316/316L Stainless Steel Grade:
It is quite ductile and forms easily. Cold working operations will increase the strength and hardness of the alloy and might leave it slightly magnetic.
316/316L Stainless Steel Grade:
It can be readily welded by most standard processes.
|
|
C |
Mn |
P |
S |
Si |
Cr |
Ni |
Mo |
N |
Cu |
|
316 |
0.08 |
2.00 |
0.045 |
0.03 |
0.75 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
0.10 |
/ |
|
316L |
0.03 |
2.00 |
0.045 |
0.03 |
0.75 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
0.10 |
/ |
|
|
Tensile Strength (min) |
Yield Strength (min) |
Elongation |
Hardness, max |
|||
|
|
ksi |
Mpa |
ksi |
Mpa |
/ |
Brinell.HBW |
Rockwell |
|
316 |
75 |
515 |
30 |
205 |
40 |
217 |
95HRBW |
|
316L |
70 |
485 |
25 |
170 |
40 |
217 |
95HRBW |
Hot rolling is a metalworking process. Such as steel ingots or billets are difficult to deform and process at room temperature, they are generally heated to 1100 to 1250° for rolling, this rolling process is called hot rolling. Most steel materials are rolled by hot rolling, the steel delivered in the hot-rolled state has a certain degree of corrosion resistance due to the high temperature, so it can bestored in the open air. In addition, hot rolling is that it can destroy the casting structure of the ingot, refine the grain of the steel, eliminate structural defects, make the steel structure dense, and improve the hardness of the hot rolled steel.
Cold rolling refers to a rolling process that uses the pressure of rolls to squeeze steel to change the shape of the steel at room temperature. The advantafe of cold rolling is fast forming speed, high output, the coating is not damaged, and it can be made into a variety of cross-sectional forms to meet the needs of the use conditions. In addition, cold rolling can cause large plastic deformation of the steel, thereby increasing the yield point of the steel. Which is Widely used in home appliances and other industries.
What Is The Difference Between 316 And 316L?
Answer:
316L stainless steel has many of the same mechanical properties of 316 stainless steel, just contain lower levels of carbon. Lower carbon content is the only chemical difference between these two grades, leading 316L immune from sensitisation or grain boundary carbide precipitation, and easier to machine.
How Does This Stainless Steel Grade Perform At Elevated Temperatures?
Answer:
It performs extremely well at temperatures up to 120°F. The grades can be used in high concentrations at temperatures up to 120°F (38°C).
How Does This Stainless Steel Grade Perform At Elevated Temperatures?
Answer:
The letters L, F, N, or H following some stainless steel grades indicate slight differences in chemical composition. In the case of 316L, the L indicates that there is lower carbon content than is found in the 316 grade.
English
Русский
