Ronsco is delicated to constantly improving quality control system to ensure that we supply high level of stainless steel products to our customers.
Final Inspection (Finished Goods Inspection): Including dimension and tolerance, appearance quality check and mechanical properties testing etc..
|
Inspection and Test Plan for Stainless Steel Plate |
|||||||||||||||||||||
|
Materia, Specification & Quantity：316L hot rolled plate ASTM/ASME A/SA240 12X2000X6000MM 61PCS |
|||||||||||||||||||||
|
Inspection and Test Plan |
Inspection points | ||||||||||||||||||||
|
NO. |
Production Flow |
Specific Implementation Method
|
Requirement/Specification
|
Verify Document
|
Ronsco
|
TUV
|
|||||||||||||||
| 1 |
Raw material preparing, steelmaking |
According to contract standards
|
According to ASTM / ASME A / SA240
|
EN 10204 3.1 | R | R | |||||||||||||||
| 2 |
Rolling
|
Hot continuous rolled
|
According to ASTM / ASME A / SA240 |
EN 10204 3.1 | R | R | |||||||||||||||
| 3 |
Heat treatment
|
Solution, annealed
|
1040℃ quenching in water |
EN 10204 3.1 | R | R | |||||||||||||||
| 4 |
Sample cutting |
For additional tests at ISO 17025 lab
|
According to ASTM / ASME A / SA240
|
ASTM / ASME A / SA240 | H | W | |||||||||||||||
| 5 |
Trim
|
Pickling, coping, trimming in workshop
|
According to ASME SA-480 / 480M-2019; ASTM A480 / A480M-19 |
EN 10204 3.1 | R | R | |||||||||||||||
| 6 |
Inspection warehousing
|
Visual, chemical composition, mechanical properties, hardness, IGC, PMI, NACE inspection
|
ASME BPVC Sec II PART A-2019, NACE MR0103 / ISO 17495:2015, ASTM A262 PRACTICE E |
EN 10204 3.1 | R | R | |||||||||||||||
| 7 |
Slit coils to plates and marking |
According to PO request width and length to slit the coils to plates and confirm marking information with client |
Marking: STAINLESS STEEL HOT ROLLED PLATE NO.1 ASTM / ASME A / SA 240 316L 12MM X 2000MM X 6000MM HEAT & BATCH NUMBER（炉批号） CHINA |
PO | R | R | |||||||||||||||
| 8 |
Final inspection |
100% final visual inspection, sizes chat, quantity and weight
|
PO | PO | H | W | |||||||||||||||
| 9 |
Packing
|
Standard export packaging suitable for sea transportation |
Visual | PO | H | W | |||||||||||||||
|
Note: 1) All materials shall be meet mandatory requirements are applicable by standards as above mentioned. 2) Stock is not accpeted. 3) Inspection Ponts:H: Shutdown Point to be checked, W - On-site witness point,R - Record is true |
|||||||||||||||||||||
|
Prepared by: Ronsco |
Reviewed by: | Approved by: | |||||||||||||||||||
|
Sign: |
Sign： | Sign： | |||||||||||||||||||
|
Date: 12.21.2021 |
Date: | Date: | |||||||||||||||||||
English
Русский